How To Change 2000 Dodge Stratus Solenoid

This replacement Transmission Shift Solenoid is just what you demand to go your vehicle in good running lodge again!

This shift solenoid mounts exterior the transmission, so yous practice not need to remove the transmission to install. This solenoid controls how the transmission fluid is directed through your manual and ultimately shifts your transmission. Over fourth dimension these solenoids tin become chock-full resulting in poor shifting quality, or even sticking in gear.

Specifications:

Fits vehicles with A604 4spd automatic transmissions but
Direct replacement
Built to strict quality control standards

This shift solenoid makes a nifty replacement and has good toll savings over a dealer unit.

Item Condition: New

Attention California Customers:

Alert:This product tin expose you lot to chemicals including 1,three-Butadiene, which is known to the State of California to crusade cancer, and nascency defects or other reproductive damage. For more data, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed past our express lifetime warranty. In the event this detail should fail due to manufacturing defects during intended use, we will supplant the function gratuitous of charge. This warranty covers the cost of the function only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United states). Standard aircraft charges utilise to Hawaii, Alaska and U.s.a. Territories. Shipping is non bachelor to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and The states Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are bachelor at checkout.

How to Replace Transmission Shift Solenoid 1995-2010 Chrysler Sebring Sedan Coupe

Created on: 2013-10-31

Watch this video to learn how to fix a transmission that isn't shifting properly. The experts at 1A Auto show you lot how to replace the manual shift solenoid in your 01-06 Chrysler Sebring.

pace 1 : Removing the Air Intake Box
- Loosen the air intake hose clamp with a flat blade screwdriver
- Separate the hose from the air intake box
- Remove the 8mm nut from the air box bracket
- Lift the air box subclass up and out
pace ii : Removing the Automated Transmission Shift Solenoid
- Remove the 8mm commodities from the shift solenoid wiring harness
- Disconnect the wiring harness
- Remove the three 10mm bolts from the shift solenoid
- Clean the area with carburetor cleaner
- Pry the shift solenoid abroad from the manual with a pry bar
- Lift the shift solenoid upward and out
- Carefully remove the gasket from the transmission with a razor bract, being sure not to scratch the aluminum
step 3 : Installing the New Automatic Transmission Shift Solenoid
- Clean the mounting expanse with carburetor cleaner
- Place the gasket onto the new shift solenoid
- Get-go the middle 10mm commodities into the shift solenoid
- Put the solenoid into place
- Start the other ii 10mm bolts into the solenoid
- Tighten the iii 10mm bolts to 17 - 17 pes-pounds of torque
- Connect the solenoid wiring harness
- Insert the 8mm bolt into the wiring harness
stride four : Reinstalling the Air Intake Box
- Put the air box into identify using the locating tabs
- Reconnect the air intake hose
- Tighten the air hose clamp with a flat blade screwdriver
- Fasten the 8mm nut onto the air box bracket